To Next PageTo Next PageHow to test the LAN path to my NETGEAR Orbi RBS50?
To test the LAN path to your router, check the physical connections. For a wired connection, ensure that the numbered LAN port LED is lit for the port to which you are connected. Additionally, verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer to ensure correct network configuration.
General| Type | Network repeater |
|---|---|
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum transfer distance | 15.23 m |
| External power adapter | Yes |
| Antenna type | Internal |
| Antennas quantity | 6 |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100/1000Base-T(X) |
| Security algorithms | WPA, WPA2-PSK |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Product color | White |
Weight and Dimensions| Depth | 78.9 mm |
|---|---|
| Width | 170.3 mm |
| Height | 225.8 mm |
| Weight | 890.5 g |
Provides step-by-step instructions for cabling the Orbi router to your modem and powering it on.
Guides on optimal satellite placement within WiFi range and the process for syncing satellites with the Orbi router.
Explains how to establish a wired backhaul connection for Orbi satellites using Ethernet cables.
Details on connecting to the Orbi network via wired Ethernet or WiFi, including finding and joining the WiFi network.
Explains different login types (ISP, WiFi, NETGEAR account, router login) and how to access the router via web browser.
Guide to using the Setup Wizard for automatic detection and configuration of Internet settings on the Orbi router.
Steps to manually set up Internet connection settings, including specifying connection types and login details.
Instructions for setting up various IPv6 Internet connection types like Auto Detect, Auto Config, and tunnel configurations.
Details on enabling and configuring Circle smart parental controls via the router web interface or Orbi app.
Configures fundamental WiFi settings like network name (SSID), security type, and WiFi channel.
Modifies the WiFi password (network key) and selects WPA security options for network protection.
Checks for and installs the latest firmware updates for the Orbi router and satellites to ensure optimal performance and security.
Modifies the router's administrative login password for enhanced security, recommending strong password practices.
Allows specific incoming traffic types to reach servers on the local network by forwarding ports.
Establishes a virtual private network (VPN) connection to securely access the network remotely via a client-to-gateway tunnel.
Configures the router's VPN service settings, including UDP/TCP types and port numbers for TUN/TAP modes.
Guides for installing OpenVPN client software on Windows, Mac, iOS, and Android devices for VPN access.
Steps to establish a VPN tunnel from a Windows computer to the Orbi router for secure remote network access.
Configures the router to allow VPN clients to access the home network's Internet service remotely.
Solutions for problems where the router and satellite fail to sync, including placement and re-syncing steps.
Troubleshooting steps for inability to log in to the router, including checking network connection and admin password.
Diagnoses issues preventing Internet access, checking IP addresses, modem status, and ISP configuration.
Steps for resolving PPPoE connection problems, verifying status, and checking ISP-provided credentials.
Diagnoses issues with connecting to the Orbi WiFi network, checking SSID broadcast, security, and device compatibility.
