NETGEAR Orbi RBR50 User Manual

Table 5. Factory default settings for the router
Default SettingFeature
orbilogin.comUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet connection
1500WAN MTU size
AutoSensingPort speed
192.168.1.1LAN IPLocal network (LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
GMT for WW except NA and GR,
GMT+1 for GR, GMT-8 for NA
Time zone
DisabledTime zone adjusted for daylight
saving time
DisabledSNMP
Disabled (except traffic on port 80,
the HTTP port)
Inbound (communications coming
in from the Internet)
Firewall
Enabled (all)Outbound (communications going
out to the Internet)
DisabledSource MAC filtering
User Manual144Supplemental information
Orbi WiFi System

NETGEAR Orbi RBR50 Specifications

General

WiFi Technology	802.11ac
Coverage	Up to 5, 000 sq ft
Ethernet Ports	4 Gigabit Ethernet ports
USB Ports	1 USB 2.0 port
Memory	512MB NAND Flash and 512MB RAM
Antenna	Internal antennas
Security	WPA2-PSK
Beamforming	Implicit & Explicit Beamforming for 2.4GHz & 5GHz bands
WiFi Speed	AC3000 (1733 + 866 + 400 Mbps)
Weight	1.96 lb
Processor	710MHz quad-core processor
Dimensions	6.7 x 3.1 x 8.9 inches