NETGEAR Orbi RBR50 User Manual

Table 10. Factory default settings for the satellite (Continued)
Default SettingFeature
192.168.1.250LAN IPLocal network (LAN)
255.255.255.0Subnet mask
DisabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
GMT for WW except NA and GR,
GMT+1 for GR, GMT-8 for NA
Time zone
DisabledTime zone adjusted for daylight
saving time
DisabledSNMP
DisabledWiFi communicationWiFi
See satellite labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
7
Transmission speed
United States in the US; otherwise,
varies by region
Country/region
2.4 GHz front and back haul: Auto
5 GHz front haul:
•
Channel 48 for NA, PR, AU, CA,
and TW
•
Channel 36 for EU
5 GHz back haul:
•
Channel 157 for NA, PR, AU, CA,
and TW
•
Channel 108 for EU
RF channel
7
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.
User Manual154Supplemental information
Orbi WiFi System

NETGEAR Orbi RBR50 Specifications

General

WiFi Technology	802.11ac
Coverage	Up to 5, 000 sq ft
Ethernet Ports	4 Gigabit Ethernet ports
USB Ports	1 USB 2.0 port
Memory	512MB NAND Flash and 512MB RAM
Antenna	Internal antennas
Security	WPA2-PSK
Beamforming	Implicit & Explicit Beamforming for 2.4GHz & 5GHz bands
WiFi Speed	AC3000 (1733 + 866 + 400 Mbps)
Weight	1.96 lb
Processor	710MHz quad-core processor
Dimensions	6.7 x 3.1 x 8.9 inches