NETGEAR Orbi RBR50 User Manual

9.
If your outgoing email server requires authentication, select the My Mail Server
requires authentication check box and do the following:
•
In the User Name field, type the user name for the outgoing email server.
•
In the Password field, type the password for the outgoing email server.
10. To send alerts immediately, select the Send Alerts Immediately check box.
Email alerts are sent immediately when someone attempts to visit a blocked site.
11.
To send logs based on a schedule, specify these settings:
•
From Send logs according to this schedule menu, select the schedule type.
•
From the Day menu, select the day.
•
From the Time menu, select the time, and select the am or pm radio button.
12. Click the Apply button.
Your settings are saved.
Logs are sent automatically. If the log fills before the specified time, it is sent. After
the log is sent, it is cleared from the router memory. If the router cannot email the
log and the log buffer fills, the router overwrites the log.
User Manual55Control Access to the Internet
Orbi WiFi System

NETGEAR Orbi RBR50 Specifications

General

WiFi Technology	802.11ac
Coverage	Up to 5, 000 sq ft
Ethernet Ports	4 Gigabit Ethernet ports
USB Ports	1 USB 2.0 port
Memory	512MB NAND Flash and 512MB RAM
Antenna	Internal antennas
Security	WPA2-PSK
Beamforming	Implicit & Explicit Beamforming for 2.4GHz & 5GHz bands
WiFi Speed	AC3000 (1733 + 866 + 400 Mbps)
Weight	1.96 lb
Processor	710MHz quad-core processor
Dimensions	6.7 x 3.1 x 8.9 inches