The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VPN Service.
The VNP page displays.
5. Select the Enable VPN Service radio button.
6. Scroll down to the Clients will use this VPN connection to access section, and select the Home Network
only radio button.
This is the default setting.The VPN connection is only to your home network, not to the Internet service
for your home network.
7. Click the Apply button.
Your settings are saved.
8. Click For Windows or For Non Windows button and download the configuration files for your VPN
clients.
9. Unzip the configuration files and copy them to the folder where the VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at C:\Program
files\OpenVPN\config\ by default.
Use VPN to Access Your Internet Service at Home
When you’re away from home and you access the Internet, you usually use a local Internet service provider.
For example, at a coffee shop you might be given a code that lets you use the coffee shop’s Internet service
account to surf the web.
Nighthawk lets you use a VPN connection to access your own Internet service when you’re away from home.
You might want to do this if you travel to a geographic location that doesn’t support all the Internet services
that you use at home. For example, your Netflix account might work at home but not in a different country.
Use VPN to Access Your Network
152
AC1600 Smart WiFi Router Model R6260
To Next Page
Loading...
Need help?
General
Weight and Dimensions
