116
A
A. Supplemental Information
This appendix provides factory default settings and technical specifications for the R6300 WiFi
Router 802.11ac Dual Band Gigabit.
Factory Settings
You can return the router to its factory settings. the end of a paper clip or a similar object to
press and hold the Reset button on the back of the router for at least 7 . The router resets,
and returns to the factory configuration settings shown in the following table.
Table 4. Factory default settings
Feature Default behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed Autosensing
Local network
(LAN)
LAN IP 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone Pacific time
Time zone daylight savings time Disabled
Allow a registrar to configure this
router
Enabled
To Next Page
Loading...
