NETGEAR RangeMax Wireless PCI Adapter WPN311 User Manual
2-15
v3.0, January 2007
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WPA2-PSK [AES], and enter the passphrase.
The passphrase can be a word or group of printable characters. For more information
about wireless security, see the online document:
http://documentation.netgear.com/reference/enu/wireless/index.htm.
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard.
Figure 2-6
Note: You will not get a wireless network connection unless the SSID entered
exactly matches the SSID used by the access point.
To Next Page
Loading...
