NETGEAR RangeMax Wireless PCI Adapter WPN311 User Manual
2-16
v3.0, January 2007
Setting up WPA-PSK Security
Follow the steps below to configure WPA-PSK Security.
1. Run the WPN311 Smart Wizard.
a. Make sure the WPN311 software is installed and the WPN311 is properly installed in a
PCI slot in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WPA-PSK [TKIP] and enter the passphrase.
The passphrase can be a word or group of printable characters. For more information
about wireless security, see the online document:
http://documentation.netgear.com/reference/enu/wireless/index.htm.
Figure 2-7
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
To Next Page
Loading...
