Chapter 2: Diagnostics and Maintenance | 23
ReadyNAS 4200 Hardware Manual
4. Press and hold the Reset button for 3 seconds to confirm the menu selection and proceed
with that option.
The system does the following:
a. Blinks both LEDs twice to confirm the selection.
b. Proceeds with clearing the disks.
c. Powers down.
5. Power on the system.
The system does the following:
a. Reboots.
b. Performs disk diagnostics.
The disks now need to be formatted.
6. Run the RAIDar utility. RAIDar prompts you to click Setup
7. Click Setup to display the ReadyNAS Volume Setup screen.
To Next Page
Loading...
