24 | Chapter 2: Diagnostics and Maintenance
ReadyNAS 4200 Hardware Manual
8. Select either the Expandable Volume (X-RAID2) or the Flexible Volume (Flex-RAID) radio
button, configure the options accordingly, and click Create volume now. The volume and
initialization process begins.
Note: If no action is taken within 10 minutes, the system defaults to
X-RAID2 with 10 GB reserved for snapshots.
RAIDar shows that the system is initializing the volume. The system powers down when
the volume initialization is complete.
9. Power the system on. It performs diagnostics while it boots.
10. Click Rescan in RAIDar to connect to the system.
RAIDar finds the system and show that it is booting.
11. When RAIDar shows that the system is ready, select the system from the list, and click
Setup to log in to FrontView and configure the system.
To Next Page
Loading...
