NETGEAR Trek PR2000

5
Indicator LEDs
Monitor the status of your Trek using the following LEDs:
Power LED
• Green. The Trek is powered on.
• O. The Trek is powered o.
Internet LED
• Green. The Trek is connected to the Internet.
• Blinking green. One of the following occurred:
• The Reset button was pressed longer than five
seconds.
• A firmware upgrade is in progress.
• The bandwidth limit was exceeded.
• O. The Trek is not connected to the Internet.
WiFi LED
• Green. The WiFi radio is operating.
• O. The WiFi radio is o.
USB LED
• Green. A USB device is connected and ready.
• O. No USB device is connected.