EasyManuals Logo

NETGEAR VPN Release Note

NETGEAR VPN
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Issue# Priority
Synopsis
4606 M Windows XP "Digital signature not found" for crypto OSD
adapter during install. Description: Selected option to install
Device Connect Authentication and Remote Upgrade for install
of client. During install on Windows 2000 received "Digital
Signature not Found" for Crypto OSD Adapter. Workaround:
Select OK to continue past message, and install will complete
successfully.
4657 H SCEP Request to SMC CA with an underscore in the common
name causes the CN to be corrupt. Description: SCEP request
to SMC in the clear causes with an underscore in the CN causes
the Common Name to be corrupt after retrieval. The Common
Name retrieved is a # sign followed by a long numeric string.
Workaround: Only use numeric and alphanumeric characters
for the CN during SCEP request.
4687 I Windows 9x: Dial-up VA Required sessions complete even
when VA isn't created Description: When attempting a dial-up
VA session with only one dial-up adapter present on the
machine (i.e., improper configuration), the IPSec SA completes
even though the VA adapter is not added. The log shows a
virtual interface constructed but no message for virtual adapter
added. Workaround: Verify that two dial-up adapters are
present on the machine before attempting dial-up VA sessions.
4933 H Unable to Map drives on Windows NT with Enternet 1.5 PPPoE
software over a secure connection. Description: System
hangs when trying to map a drive over a secure PPPoE
connection and may require a system restart. Workaround:
The client will Map drives using RASPPPoE software. Get this
from this free download link: http://user.cs.tu-
berlin.de/~normanb/#Download
5317 H Manual connect fails when connecting to a subnet via a
gateway set to Hostname or an RGW on Windows 9X.
Description: Manual connect on Windows 9x platforms to a
remote subnet (or range) specified with an address, which is
apparently (by address class) a subnet address, will report a
RequestLocalAddress failure. This is because Windows 9X will
not generate traffic to such addresses. Workaround: Initiate
traffic to establish the tunnel such as a ping, web, email, or
FTP traffic.

Other manuals for NETGEAR VPN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR VPN and is the answer not in the manual?

NETGEAR VPN Specifications

General IconGeneral
BrandNETGEAR
ModelVPN
CategoryNetwork Router
LanguageEnglish

Related product manuals