EasyManua.ls Logo

NETGEAR VPN - Testing and Troubleshooting VPN Connections

NETGEAR VPN
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue# Priority
Synopsis
5318 H Error updating filter record when saving a policy with an
Internet Interface on connections that have RGWs specified.
Description: Log Viewer reports "Error updating filter record"
when specifying an Internet Interface on connections that have
RGWs specified. Workaround: Do not specify an Internet
Interface on connections that have RGWs. Use the manual
connect only option or specify "any" Internet Interface.
5395 H Route add fails when using the VA and both peers are NAT'd
and the private IP addr. on both nets are the same
Description: In a NAT'd environment, if both private networks
have the same address space (in the test it is 172.16.x.x
255.255.0.0), the phase 1 completes as expected. When the
mode config attributes are applied, the VA is created, but when
the route add is issued (route add 10.100.200.254 mask
255.255.255.255 172.16.50.1), it fails with error code
(0000003A). Workaround: If the VA is not used, the
connection works as expected. If the mode config address and
the physical address are not on the same logical subnet, the
VA works as expected.
5444 I Non-Admin Logon SCEP request will not retrieve the RA
Certificate Description: If logged on as Non-Admin, the
Import Personal Cert window remains open with no prompt or
error message after attempting to place the cert in the local
machine store, which is the default setting in Advanced
properties. Workaround: Open the Advanced tab in the SCEP
request form, and uncheck the box to place certificate in local
machine store if logged on as non-admin when importing a
personal cert.
5446 I Non-admin login Personal Cert Import displays no error
message after attempt to place cert in local machine store
Description: If logged on as Non-Admin, the Import Personal
Cert window remains open with no prompt or error message
after attempting to place the cert in the local machine store
due to the check box. Workaround: The check box for Place
cert in local machine store should be unchecked if logged on as
non-admin when importing a personal cert.

Other manuals for NETGEAR VPN

Related product manuals