DNE Known Issues and Workarounds
This is a list of the issues known at time of release for DNE 2.2.0, extracted from
the DNE release notes.
• Windows NT-disabled protocols are enabled when DNE is installed
Description: On Windows NT 4.0 only, if protocols are disabled, and you install
DNE, the protocols become enabled.
Workaround: Disable the protocols through the Control Panel or remove the
protocols after installing DNE.
• Windows NT Plug and Play Drivers
Description: Windows NT doesn’t support Plug and Play even on laptops
running whose manufacturers attempted to create Windows NT Plug and Play
support through a custom utility. DNE can't work with these custom, non-
standard, non-NDIS-compliant utilities.
Workaround: Disable the utility and obtain the latest NIC driver from the
vendor (not the special prepackaged one that the laptop vendor supplies with
the utility).
• The client is incompatible with the ATT Dialers’ VPN component
Description: The VPN component included with the ATT dialer is incompatible
with DNE.
Workaround: Clear the VPN component check box when installing the ATT
dialer.
To Previous Page
Loading...
