NETGEAR WG311v3 - DHCP Configuration of TCP;IP in Windows XP or 2000; DHCP Configuration of TCP;IP in Windows XP

Reference Manual for the NETGEAR 802.11g Wireless PCI Adapter WG311v3
Preparing Your PCs for Network Access C-7
DHCP Configuration of TCP/IP in Windows XP or 2000
You will find there are many similarities in the procedures for different Windows systems when
using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of
Windows.
DHCP Configuration of TCP/IP in Windows XP
Locate your Network Neighborhood icon.
• Select Control Panel from the Windows XP Start Menu.
• Select the Network Connections icon on the Control Panel. This will take
you to the next step.
Now the Network Connection window
displays.
The Connections List that shows all the
network connections set up on the PC,
located to the right of the window.
• Right-click on the Connection with
the wireless icon and choose Status.