NETGEAR 54 Mbps Wireless PCI Adapter WG311 v3 User Manual
1-6
v3.0, February 2007
4. Connect to a wireless network.
a. Select the wireless network from the drop-down list, and the wizard records your choice.
If the network uses security, then the Smart Wizard detects it.
b. Follow the Wizard steps for Security (if used) and for saving a Profile.
c. After you have reviewed the settings, click Finish.
The WG311 v3 icon appears in the system tray and on the desktop. The wizard
initiates your wireless connection. It could take up to a minute for your wireless
connection to be established.
Figure 1-5
Note: Hidden networks do not broadcast the Network Name (SSID). These
networks are in the drop-down list, but the Network Name (SSID) is blank.
Hidden
To Next Page
Loading...
Need help?
General
