NETGEAR WG311v3 User Manual

NETGEAR 54 Mbps Wireless PCI Adapter WG311 v3 User Manual
1-10
v3.0, February 2007
Removing the WG311 v3 Software
You can remove the wireless adapter software in these two ways:
• Navigate the Windows Start menu to the WG311 v3 Wireless PCI Adapter program group,
select the uninstall option, and follow the screen prompts.
• Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select
the WG311 v3 Wireless PCI Adapter option, and follow the screen prompts.
Upgrading the WG311 v3 Software
Upgrades may be available at the NETGEAR website. To install an upgrade, follow these steps.
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR website Support page.
3. Remove the WG311 v3 software from your computer.
4. Remove the WG311 v3 adapter from your computer, and restart your computer.
5. Run the installer that you downloaded (the file ends in .exe).
6. Follow the installer instructions, and if prompted, then restart your computer.

NETGEAR WG311v3 Specifications

General

Brand	NETGEAR
Model	WG311v3
Category	PCI Card
Language	English