NETGEAR WN1000RP

Network Settings
23
WiFi Booster for Mobile WN1000RP
CAUTION:
Do not try to go online, turn off the booster, shut down the computer, or do
anything else to the booster until it finishes restarting.
4. Close the message window.
 To erase settings:
Under some circumstances (for example, if you
have lost track of the changes that you made
to the booster settings), you might want to erase the configuration. After an erase, the
booster returns to its factory settings (see Factory Settings on p
age 31).
To erase the configuration, click the Er
ase button in the Backup Settings screen. The booster
automatically shuts down and reboots with its factory settings.
CAUTION:
Do not try to go online, turn off the booster, shut down the computer, or do
anything else to the booster until it finishes restarting.
Set the Password
The user name to access the booster is admin, and its default password is password.
NETGEAR strongly recommends that you set a more secure password.
 To set the password:
1. Select Mainte
nance > Set Password. The following screen displays:
2. Type the old password, type the new password twice, and then click Apply.