NETGEAR WN2000RPTv2 Installation Guide

11
Extender Performance
The Link Rate LED indicates performance.
• The best performance is delivered when the Link Rate LED
is green.
• A workable performance is delivered when the Link Rate
LED is amber.
• A red Link Rate LED indicates a poor connection or no
connection.
• If the Link Rate LED is off, there is no connection between
the Extender and the router.
Tip: Make sure your PC to Extender LED is green
before you check the Link Rate LED for
performance.
To improve the Extender performance:
1. Move the Extender closer to the router or to a different location
with a better line of sight.
2. As you move the Extender, check the Link Rate and the PC to
Extender connection LEDs on the front panel until you find a good
location.

NETGEAR WN2000RPTv2 Specifications

General

WiFi Technology	802.11n
Frequency Band	2.4GHz
Ethernet Ports	1 x 10/100 Mbps
Antenna	Internal
Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
LED Indicators	Ethernet
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)