NETGEAR WN2000RPTv2 Installation Guide

12
When to Use the Extender Wireless
Network
NETGEAR recommends that you connect to the Extender wireless
network only when a PC or wireless device is in a “dead zone” where
the network connection to your existing router is very poor or
nonexistent. This is because data traffic routed through the Extender
wireless network is slower than traffic directly from the original
wireless router network.
If you cannot connect from your wireless device to the Extender,
move the Extender to a different location halfway between the device
and the router. If, after you try several locations, the device cannot
connect to the Extender, move the Extender closer to the device.

NETGEAR WN2000RPTv2 Specifications

General

WiFi Technology	802.11n
Frequency Band	2.4GHz
Ethernet Ports	1 x 10/100 Mbps
Antenna	Internal
Wireless Speed	300 Mbps
Security	WEP, WPA, WPA2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
LED Indicators	Ethernet
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)