NETGEAR WN2500RP User Manual

Getting Started
9
Universal Dual Band WiFi Range Extender WN2500RP
Connect a Computer to the Extender with an Ethernet
Cable
CAUTION:
Do not use an Ethernet cable to connect the extender to a router. If you do
so, the extender does not work because it is designed to use only a
wireless connection to the router.
You can use the LAN ports on the extender to connect wired devices such as
Ethernet-enabled gaming consoles, printers, or computers.
Note: Before you connect wired devices or computers, first install and set
up your extender as described in the Universal Dual Band WiFi
Range Extender WN2500RP Installation Guide that came in the
package.
 To cable a computer to the extender:
1. Locate the four LAN ports on the rear panel of the extender..
2. Use an Ethernet cable to connect your computer to one of these LAN ports.
3. Connect the extender power adapter, and plug it into an electrical outlet.
4. Log in as described in the following section.

NETGEAR WN2500RP Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Wi-Fi standards	802.11a, 802.11b, 802.11g
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Bandwidth	2.4 GHz
Rack mounting	No
Minimum system requirements	Microsoft Internet Explorer 5.0, Firefox 2.0, Safari 1.4, Google Chrome 11.0
Ethernet LAN (RJ-45) ports	4
DHCP client	-
Security algorithms	WEP, WPA, WPA2-PSK
Certification	CEC, RoHS, WEEE
Product color	Black
LED indicators	LAN, Link, Power, WLAN

Weight and Dimensions

Depth	153 mm
Width	223 mm
Height	31 mm
Weight	370 g