6
Set Up Two Wireless Connections
The first wireless connection is between the Extender and your
router. The second wireless connection is between your computer or
wireless device and the Extender. How you set up these connections
depends on whether or not your wireless equipment supports Wi-Fi
Protected Setup (WPS).
Using WPS to Connect the Extender to Your Router
1. First, press your router’s WPS button.
2. With
in 2 minutes, press and hold the Extender’s WPS button until
its WPS LED
on the front starts flashing.
When the Extender connects to your router, the Link Rate LED
lights up. The Extender's wireless network name (SSID)
changes to your router's SSID with _EXT at the end. The
Extend
er uses the same wireless security settings as your router.
3. Af
ter the Extender is connected to your router, use your computer
or wireless device to join the Extender’s wireless network.
To Next Page
Loading...
