NETGEAR WN3000RP User Manual

Manage the Extender Network
18
N300 WiFi Range Extender
Log In to the Extender After Initial Setup
After installation, you can log in to the extender to view or change its settings.
 To log in to the extender after the initial setup:
1. Connect a computer or WiFi device to the extender
’s network.
2. Launch a web browser and in the address field, enter www
.mywifiext.net or
www.mywifiext.com.
A login screen displays.
3. Enter admin for the user name and password for the password.
If your extender is connected to the Internet, the extender automatically checks for new
firmware at the NETGEAR website.
The Status screen displays.
Change the admin Password
The user name to access the extender is admin, and its default password is password.
NETGEAR strongly recommends that you set a more secure password.
 To change the password for the extender:
1. On your computer
, launch a web browser.
2. In the address field of your browser
, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www
.mywifiext.net in your browser.

NETGEAR WN3000RP Specifications

General

Interface	Ethernet
Connectivity technology	Wireless
Wi-Fi band	Single-band (2.4 GHz)
Ethernet LAN	Yes
Security algorithms	WEP, WPA, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Chipset	-
Internal	No
Certification	RoHS, WEEE, CEC
Component for	PC/Laptop
Product color	White
Dimensions (WxDxH)	112 x 74 x 45 mm
Minimum system requirements	802.11 b/g/n 2.4 GHz wireless router or gateway 802.11 b/g/n 2.4 GHz wireless adapter or Ethernet adapter and cable for each computer
Compliance industry standards	IEEE 802.11 b/g/n
Compatible operating systems	Windows 7, Vista, XP, 2000 Mac OS UNIX Linux

Weight and Dimensions

Weight	245 g