NETGEAR WN3000RP User Manual

Monitor and Maintain the Extender
33
N300 WiFi Range Extender
 To restore factory settings:
1. Insert a paper clip into the Factory Reset hole and hold it until the Power LED blinks
amber
.
Factory
Reset
button
2. Release the button.
All the LEDs turn off for about three seconds.
The Power LED lights solid amber for about 30 seconds.
The Power LED
lights solid green.
The extender returns to its factory settings.
Erase the Extender Settings and Return to Factory Settings
CAUTION:
This process erases any settings that you configured in the extender.
 To erase the extender’s current settings:
1. On your computer
, launch a web browser.
2. In the address field of your browser
, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www
.mywifiext.net in your browser.
3. Type admin for the user name and password for the password.
If you already changed the password, type your personalized password.

NETGEAR WN3000RP Specifications

General

Interface	Ethernet
Connectivity technology	Wireless
Wi-Fi band	Single-band (2.4 GHz)
Ethernet LAN	Yes
Security algorithms	WEP, WPA, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Chipset	-
Internal	No
Certification	RoHS, WEEE, CEC
Component for	PC/Laptop
Product color	White
Dimensions (WxDxH)	112 x 74 x 45 mm
Minimum system requirements	802.11 b/g/n 2.4 GHz wireless router or gateway 802.11 b/g/n 2.4 GHz wireless adapter or Ethernet adapter and cable for each computer
Compliance industry standards	IEEE 802.11 b/g/n
Compatible operating systems	Windows 7, Vista, XP, 2000 Mac OS UNIX Linux

Weight and Dimensions

Weight	245 g