Supplemental Information
42
N300 WiFi Range Extender
Factory Default Settings
The following table lists the factory settings for the extender. You can use the Factory Reset
button or the Erase feature to return the extender to these settings. (See Return the Extender
to Its Factory Settings on page 32.)
Table 4. Factory Settings
Feature Setting
Setup Wizard Enabled
Wireless communication Enabled
Wireless network name (SSID) NETGEAR_EXT
Security Disabled
Transmission speed Auto
1
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Country/region Varies by region
Operating mode 802.11n, 802.11g, 802.11b
Data rate Up to 300 Mbps
DHCP Client enabled
Technical Specifications
The following table includes the product specifications.
Table 5. Technical specifications
Extender Specifications
Network protocol and standards
compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
Power consumption 100–240V 0.1 A, 50–60 Hz
Physical specifications • Dimensions: 67 x 55 x 34 mm (2.64 x 2.17 x 1.34 in.)
• W
eight: 102 g ~ 110 g (3.60 oz ~ 3.88 oz) varied by power plug
type
To Next Page
Loading...
