16
ReadySHARE Printer
ReadySHARE Printer lets you connect a USB printer to the
extender’s USB port, and access it wirelessly.
To enable ReadySHARE Printer:
1. Connect the USB printer to the extender’s USB port with a USB
printer cable.
2. Install the USB printer driver software on each computer that will
share the printer. If you do not have the printer driver, contact the
printer manufacturer to find and download the most recent printer
driver software.
3. On each computer that will share the printer, download the
NETGEAR USB Control Center utility. The NETGEAR USB utility
has a Mac version and a Windows version, which you can access
from the ReadySHARE Printer area of the page you access using
this URL: www.netgear.com/readyshare
To Next Page
Loading...
