NETGEAR WN3500RP

The top and side panels have the following features:
On/Off button. Use this button to turn
the extender on and off.
Reset
factory
settings
On/Off
button
WPS
button
Ethernet
port
Audio
port
USB
port
WPS button. Use this button to connect
the extender to your existing WiFi
network. For more information, see
Connect the Extender to an Existing WiFi
Network on page 7.
Ethernet port. Use the Ethernet port on
the extender to connect an Ethernet-
enabled device wirelessly to your
network.
Audio port. Use the Audio port to
connect the extender to your speaker.
USB port. Use the USB port to connect
the extender to a printer.
Reset factory settings. To reset the
extender to its original factory settings,
insert a paper clip into the reset hole and
hold it until the Power LED flashes.
3