NETGEAR WNCE2001 - Ethernet to Wireless Adapter Product Data

350 E. Plumeria Drive
San Jose, CA 95134-1911
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
© 2010 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., regis-
tered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of
their respective holder(s). Information is subject to change without notice. All rights reserved.
This product is packaged with a limited warranty, the acceptance of which is a condition of sale.
*Basic technical support provided for 90 days from date of purchase.
†
Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate. NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future
standards.
‡
“N”, “Wireless-N” and “802.11n” refer to compliance with IEEE 802.11n specification version 2.0 only.
D-WNCE2001-2
System Requirements
• Existing wireless home network with Internet
connection
– 2.4 GHz 802.11 b/g/n AP/gateway/router
• TV, DVR, game console or home A/V device with
Ethernet port
• Optional — USB port on A/V device to power
• Microsoft
®
Internet Explorer
®
5.0, Firefox
®
2.0 or
Safari 1.4 or higher for configuration
Features
• Connects to any existing 2.4 Ghz Wi-Fi access
point, gateway or router
• Push ‘N’ Connect using Wi-Fi Protected Setup
®
for easy setup
• Dynamic LEDs display real-time network
connection status
• Wi-Fi Protected Access
®
(WPA2-PSK, WPA-PSK)
and WEP
• One (1) Ethernet port to connect to home A/V
devices
Standards
• IEEE 802.11n version 2.0 at 2.4 GHz
Physical Specifications
• Dimensions: 81.3 x 62 x 17.9mm
(3.20 x 2.44 x .70 in)
• Weight: 60 g (2.12 oz)
Package Contents
• Universal WiFi Internet Adapter (WNCE2001)
• Ethernet cable
• USB power cable
• Power adapter, localized to country of sale
Warranty
• Localized to country of sale
Universal WiFi Internet Adapter WNCE2001
Learn more at www.netgear.com/connectWiFi

NETGEAR WNCE2001 - Ethernet to Wireless Adapter Specifications

General

Device Type	Ethernet to Wireless Adapter
Brand	NETGEAR
Model	WNCE2001
Wireless Standards	802.11b/g/n
Wireless Speed	Up to 300 Mbps
Wireless Security	WEP, WPA, WPA2
Ethernet Port	1 x 10/100 Mbps
Frequency Band	2.4 GHz
Antenna	Internal
Power	5V DC
Weight	0.16 lbs