NETGEAR WNDR3700v4 - Factory Settings Reference

Supplemental Information
109
N600 Wireless Dual Band Gigabit Router WNDR3700v4
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object
to press and hold the Restore Factory Settings button on the router for at least 5 seconds.
The router resets, and returns to the factory configuration settings shown in the following
table.
Table 2. Factory default settings
Feature Default behavior
Router login User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default hardware address
WAN MTU size 1500
Port speed AutoSensing
Local network
(LAN)
LAN IP address 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
Time zone Pacific time
Time zone daylight savings time Disabled
Allow a registrar to configure this
router
Enabled
DHCP starting IP address 192.168.1.2
DHCP ending IP address 192.168.1.254
DMZ Disabled
Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Time zone adjusted for daylight
savings time
Disabled
Firewall Inbound (communications coming
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
Enabled (all)
Source MAC filtering Disabled