Advanced Settings
98
N600 Wireless Dual Band Gigabit Router WNDR3700v4
DHCP
In the IPv6 screen, when you select DHCP from the drop-down list, the following screen
displays.
The following fields are included in this screen:
User Class. Most people do not need to fill in this field, but if your ISP has given you a
specific host name, enter it here.
Domain Name.
This is not needed for Internet connections. You can type the domain name
of your ISP. For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would type
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field.
(For example, Earthlink Cable might require a host name of home, and Comcast sometimes
supplies a domain name.)
This is the domain name for the IPv6 connection. Do not enter the domain name for the IPv4
connection here.
The other settings are the same as for Auto Detect mode. See IPv6 LAN Setup and IPv6
Filtering on page 94.
To Next Page
Loading...
Need help?
General
