Network Settings
116
N900 WiFi Router
2. On the router that will run in bridge mode, launch a web browser from a computer or
wireless device that is connected to the network.
3. T
ype http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
4. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > Wireless Bridge.
The Wireless Bridge screen displays.
6. Select the Enable Bridge Mode check box
.
7. Click the Setup Bridge Mode W
ireless Settings button.
8. Specify the settings of the other router to which this router will connect.
a. Select the wireless network frequency (2.4 GHz or 5 GHz).
b. In the Name (SSID) field, enter the wireless network name (SSID).
c. In the Security Options section, select a radio button.
d. If prompted, type the passphrase (the WiFi password that you use to connect to the
other router).
9. Click the Apply button.
The settings for the other router are saved and the Advanced Wireless Settings screen
displays.
To Next Page
Loading...
