EasyManua.ls Logo

NETGEAR WNDR4500v3 - Dynamic DNS

NETGEAR WNDR4500v3
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Access Storage Devices Through the Internet
84
N900 WiFi Router
3. Enter the user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > NETGEAR Downloader > Download Manager.
5. Make any needed changes.
6. Click the Apply button.
Your settings are saved.
Dynamic DNS
Internet service providers (ISPs) assign numbers called IP addresses to identify each
Internet account. Most ISPs use dynamically assigned IP addresses. This means that the IP
address can change at any time. You can use the IP address to access your network
remotely, but most people don’t know what their IP addresses are or when this number
changes.
To make it easier to connect, you can get a free account with a Dynamic DNS service that lets
you use a domain name to access your home network.
To use this account, you must set up
the router to use Dynamic DNS. Then the router notifies the Dynamic DNS service provider
whenever its IP address changes. When you access your Dynamic DNS account, the service
finds the current IP address of your home network and automatically connects you.
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the Dynamic
DNS service does not work because private addresses are not routed on the Internet.

Table of Contents

Related product manuals