Share a USB Storage Device Attached to the Router
69
N900 WiFi Router
The BASIC Home screen displays.
4. Select ADV
ANCED > ReadySHARE> Advanced Settings.
5. Specify access to the storage device:
• Network Device Name.
This is the name used to access the device connected to the
router.
• W
orkgroup. If you are using a Windows workgroup rather than a domain, the
workgroup name is displayed here. The name works only in an operating system that
supports NetBIOS, such as Microsoft Windows.
• Access Method. Select the check boxes for the access methods that you want:
- Network Neighborhood/MacShare. Enabled by default.
- HTTP. Enabled by default.
You can type
http://readyshare.routerlogin.net/shares to access the storage device.
- HTTP (via Internet). Disabled by default. If you enable this feature, remote users
can type http://<public IP address/shares> (for example,
http://1.1.10.102/shares) or a URL domain name to access the device over the
Internet.
This feature supports file uploading only.
- FTP. Disabled by default.
- FTP (via Internet). Disabled by default. If you select this check box, remote users
can access the device through FTP over the Internet.
This feature supports both
downloading and uploading of files.
6. If you changed the settings, click the Apply button.
Your changes are saved.
To Next Page
Loading...
