11
To secure your Powerline network:
1. Make sure the Power LED is solid green. If it is amber, connect
a device to one of the Ethernet ports so the adapter exits power
saving mode.
2. On the first Powerline adapter, press its Security button for 2
seconds. The Power LED blinks green while the adapter is
setting up security.
3. Within 2 minutes, go to the next Powerline adapter and press its
Security button for 2 seconds.
After security is set, the Power LED turns solid green. The
adapter can communicate over the network. The Powerline LED
is blinking or solid.
To Next Page
Loading...
Need help?
General