Need help?Do you have a question about the NETGEAR XAVB5401 and is the answer not in the manual?
General| Type | Powerline Adapter |
|---|---|
| Model | XAVB5401 |
| Maximum Data Rate | 500 Mbps |
| Standards | HomePlug AV |
| Security | 128-bit AES encryption |
| Operating Frequency | 2 MHz to 68 MHz |
| Ports | 1 x Gigabit Ethernet |
| LED Indicators | Power, Ethernet |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 90% Maximum Relative Humidity, Noncondensing |
Press and release for 2 seconds to return the adapter to its default factory settings.
Used to secure the Powerline network by pairing adapters. See page 7 for details.
Connect each Powerline adapter to a separate wall outlet.
Pair adapters by pressing the Security button on each within 2 minutes.
Confirms secure network status with solid green Power LED and warns against premature button presses.
Plug one adapter into a wall outlet near your router or gateway.
To Next Page
