NETGEAR Zing - Device Basics; Components of Your Device

visit sprint.com/support for guides, tutorials and more 7
6
Get Connected
Get Connected
Setting up a Guest Wi-Fi Network
Your Zing Mobile Hotspot lets you create a
separate Guest Wi-Fi network that you can
share with temporary users. You can turn on the
Guest Wi-Fi network on the device’s Guest Wi-Fi
screen, and on the Zing Manager’s Wi-Fi page.
On the touchscreen:
1. Tap Wi-Fi, and then tap Guest Wi-Fi.
2. Tap
Turn on Guest Wi-Fi. A message shows
the Guest Wi-Fi network name and password
that your temporary user can use.
3. Tap
to close the message.
In the Zing Manager
1. Log in to the Zing Manager. (See page 8 for
details.)
2. Click Wi-Fi.
3. In the Guest Wi-Fi area, click Turn On.
Connect WPS-enabled Devices (optional)
1. On the touchscreen, tap Wi-Fi and select
WPS.
2. On the touchscreen, tap either
Pair with Main
Wi-Fi or Pair with Guest Wi-Fi (if Guest Wi-Fi is
enabled).
3. Press the WPS button on the device you want
to to connect, or follow the device’s
instructions.
4. The Zing Mobile Hotspot touchscreen will
display a confirmation when the device
connects.
See the User Guide for more detailed
information about using the WPS (Wireless
Protected Setup) feature of your Zing
Mobile Hotspot.