NETGEAR Zing - Get Connected

Get Connected
Power Up the Device
If the device is not powered on, press and hold
the Power button on the top of the device
for at least two seconds.
► The device will automatically activate. You will see
instructions to connect your first device to the Zing
Wi-Fi network. (If the device does not activate, an
alert will appear.)
Note: It can take several minutes for your device
to connect with the Sprint network.
Power Button
Wirelessly Connect Your Computer
After it’s activated, your Zing Mobile Hotspot
displays the Wi-Fi name and password. You
will need this information to connect your
Wi-Fi devices to the network.
Note: If your device is WPS-enabled, see Connect
WPS-enabled Devices.
1. From your computer, display the Wireless
Network Connections window, and then click
View Wireless Networks.
2.
Select the Wi-Fi name displayed (for example,
SprintHotspot12), click Connect, and enter
your Wi-Fi password, which is displayed on
the LCD display screen.
3. Launch your computer’s Web browser and
navigate to a Web page to confirm your
connection.
6
Get Connected