REGISTER
(1)
UPS - MEASUREMENTS UNIT
NUMBER ADDRESS
Input mains star voltage V1
Input mains star voltage V2
Input mains star voltage V3
Bypass mains star voltage V1
Bypass mains star voltage V2
Bypass mains star voltage V3
Output peak current phase L1
Output peak current phase L2
Output peak current phase L3
Output active power phase L1
Output active power phase L2
Output active power phase L3
Remaining Battery Capacity
Total output energy (32 bit)
Least Significant Register
Most Significant Register
(1)
The register number n must be addressed n-1 in the data packet.
Some measures may not be available for all the UPS. In this case, the relative register
remains at 0xFFFF value.
- 40 -