NetMan 101 - User Manual

Network Adapter
Installation and operation manual
MNSMP-03D

Summary

II. INSTALLATION AND CONFIGURATION

II.1. Connecting the equipment

II.1.1. Adapter configuration

Explains the process of configuring the adapter's software settings locally.

II. 1. 2. Hardware set-up

II. 1. 3. Software set-up

II. 2. Main configuration menu of Network Adapter

Presents the main menu options for configuring the Network Adapter.

II. 3. Description of options

II. 3. 1. Network Configuration (menu 1)

Details how to set IP address, gateway, netmask, sysContact, sysName, sysLocation, and UDP port.

II. 3. 2. Trap receivers (menu 2)

II. 3. 3. Set SNMP communities (menu 3)

II. 3. 4. Additional Setup Screen.(menu 4)

II. 3. 5. Set UPS Protocols (menu 5)

Configures communication parameters and identification details for the monitored UPS.

II. 3. 6. Modem configuration (menu 6)

II. 3. 9. Service menu (menu 9)

Accesses advanced functions like setting hosts, resetting, and upgrading firmware.

II.4. Upgrading NetMan firmware

Provides instructions on how to update the NetMan firmware.

II. 4. 1. Upgrading via serial port

Step-by-step guide to upgrade firmware using a serial connection and X-Modem protocol.

II. 4. 2. Upgrading via TFTP

Instructions for upgrading firmware using a TFTP server and UPDATE command or menu 9.

II. 5 Testing and verifying the installation

Guidance on how to test and verify the successful installation of the Network Adapter.

SNMP

NetMan 101 Specifications

General

Brand	NetMan
Model	101
Category	Network Card
Language	English