EasyManua.ls Logo

netta OL20-BD030AM - Page 5

netta OL20-BD030AM
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
No open flames, cigarettes or other possible sources of ignition
should be used in the vicinity of the device.
Component parts are designed for propane. They should only be
replaced with identical repair parts.
Failure to abide by these warnings could result in an explosion,
death, injury and/or property damage.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person in
order to avoid a hazard.
The appliance should be disconnected from the power source
during cleaning and maintenance.
Always operate the unit from a power source of equal voltage,
frequency and rating as indicated on the product identification plate.
Always use a power outlet which is grounded.
Unplug the power cord when cleaning or when not in use.
Do not operate with wet hands. Prevent water from spilling onto the
unit.
Do not immerse or expose the unit to rain, moisture, or any other
liquids.
Do not leave the unit running whilst unattended.
Do not tilt or turn over the unit.
Do not unplug while the unit is operating. Do not unplug by pulling
on the power cord.
Do not use an extension cord or an adapter plug.
Do not put objects on the unit.

Related product manuals