Cleaning, Maintenance and Storage
Storage
Long-Term Storage: If you will not be using the unit for an
extended period of time (more than a few weeks) it is best to
clean the unit and dry it out completely. Please store the unit per
the following steps:
1. Press the power button to switch off and unplug the unit.
2. Drain the remaining water from the unit.
3. Clean the filter and let the filter dry completely in a shaded
area.
4. Collect the power cord at the water tank.
5. Re-install the filter at its position.
6. The unit must be kept in an upright position when in
storage.
7. Preserving the machine in ventilating, dry, non-corrosive
gas and safe place indoor.
ATTENTION:
The evaporator inside the machine must be dried out before the
unit is packed to avoid component damage and mold. Unplug the
unit and place it in a dry open area for days to dry it out.
Another way to dry the unit is to set the humidity point more than
5% higher than the ambient humidity to force the fan to dry the
evaporator for a couple of hours.
To Next Page
