•Baud Rate:9600bps to 115200bps( Optional )
•Data Length: 8 Bits
•1bit Stop Bit: 1Bit
•Parity: None
The wiring method of the serial interface printer following the
standard rules of Serial Interface EIA standard. Consumer can get
the current default baud rate from “ Print Test Page ”and also can
adjust the baud rate via DIP switch ( DIP switch is on the bottom of
the printer
3.Basic Function Operation
3.1 Indicator Light & Printer Status
The printer has 3 Led Indicators( Power / Error and Paper
Out ),Power indicator will lights on once power is plugged in. And Error
Led will lights on when any error arose ( Paper Out / Temperature is too
high / mal-position of the carriage unit on the print head ); We can
press the “FEED” button to test the paper feeding function if the power
indicator looks well.
To Next Page
Loading...