wizard and see if we selected the right port or ask service center
for advice if needed.
3: Cash drawer does not open?
A:
Please enable the cash drawer function from device settings
and check the cable connecting way or contact service center for
advice if needed.
4: Malfunction of paper feeding?
A:
Use soft brush to clean the paper sensor and try again or send
it to the service center for repair.
5: Messy code printing after a period of time
A:
Interface board damaged , please replace or repair it.
6: Malfunction of the indicator light
A:
Check the cable connecting way / adapter / power cord /
switch on or off? Or contact the service center for repair.
7: Ethernet printer does not printer after linked with a router.
A：
Make sure the network cable and router port works well, does
the printer IP and router IP are on the same network segment? Is
the printer IP occupied by other device ? We can modify the ip
with our ip setter software attached in the cd driver. Test once
To Next Page
Loading...