modify the ip : Start - Run - input the 8printer IP - see if any
response; or contact our service center for repair.
8: Messy code printing except Arabic numeral printing.
A:
language switching incorrectly,please turn on the SW-4
switch on the DIP switches.
9: Fuzzy printing of Chinese character
A:
ON Please turn on the SW-3 switch ( DIP switches on the
bottom of the printer )
10: Malfunction of the auto paper cutting
A:
See if the SW-1 is off and ensure the cutting function is
Enabled or contact the service center for repair.
11: Red indicator keep flashing during the printing.
A:
Usually it is due to the high temperature of the print head. If
printing stopped,please contact the service center for repair.
12: How to install a network shared printer driver?
A:
Find the driver file of the shared printer from network
neighborhood and click it.
To Next Page
Loading...