Step 3:
- Connect your cell phone with our printer once installation
done .
Step 4:
- Find this icon and open it. (Ethernet interface need to
enter the IP, you can get it from the self-test page, WIFI need
to enter your IP of own setting), click on the "Connect Printer"
after the connection successfully, click on the "Print Test Page",
the printer will work.
If you use the "Ethernet interface", "USB", "WIFI"
communication, set "BluetoothDEMO" from "Step 2" into the
corresponding "NETDEMO", "USBDEMO" and "WIFIDEMO".
Customer can get all the original code from below path if
you need to develop your own APK ( Path is:
)
To Next Page
Loading...