Netum W3 - GS1 DataBar Omnidirectional (RSS Omnidirectional); Enable;Disable GS1 DataBar Omnidirectional; 1 D Barcode Modes; 1 D Normal vs. Reversal Barcode

8
GS1 DataBar Omnidirectional（RSS Omnidirectional）
Read 1D Normal Barcode/ Reversal Barcode
01671
Enable RSS Omnidirectional
01670
Disable RSS Omnidirectional*
00161*
Read 1D Normal Barcode
00160
Read 1D Reversal Barcode
FAQ
Problem: Some barcodes cannot be read.
Solution:
a. Dirty or unclear barcodes might not be read.
b. The possible reason is that setting for some barcode types are not
commonly used is off by default. You need to activate a speci�ic barcode type
to get it to work. Please contact the supplier that you’ve purchased it from
or you may go to our of�icial website” www.netum.net/” to download the
complete manual and refer to the part of “ Symbologies”.
c. Clean scanner window.