Default Con�iguration
If you want to cancel all the con�iguration that you have done to the scanner.
Scan "Factory Restore" and then Scan "USB keyboard" to reset the scanner.
Common Symbologies
Add-On Code
And EAN-8/EAN-13 Barcode can be augmented with a two-digit or �ive-digit
add-on code form a new one. In the example below, the part surrounded by
blue line is an EAN-8 barcode while the part circled by red line is add-on
code. “ Disable Add-on Code” is con�igured by default.
EAN /UPC Add-On 2 or 5
To enable or disable EAN/UPC add on 2 or 5 digts scan the appropriate
barcode below.
5
000B0
Factory Restore
000602
USB Keyboard
00551
Enable add-on 2 digits
00552
Enable add-on 5 digits
To Next Page
Loading...
