What to do if there is hum or buzz coming from Neumann.Berlin KH 120 Speakers when the audio cable is connected?
Humming or buzzing sounds from your KH 120 Speakers when the audio cable is connected usually indicates bad cabling or a ground loop in the installation. To resolve this, check all cabling to eliminate the cause of the problem. You can also change from unbalanced to balanced cabling.
Why is the Neumann.Berlin KH 120 logo off or not clearly visible, but sound is heard?
If the Neumann logo is off or not clearly visible, but you can still hear sound, it means that the Neumann logo is either switched off or dimmed. To fix this, simply switch on the Neumann logo and switch off the dimming.
How to fix Neumann.Berlin Speakers KH 120 when the Neumann logo is off and no sound is heard?
If the Neumann logo is off and no sound is heard from the KH 120 Speakers, it means that the KH 120’s main fuse has blown. Have the product checked by an authorized Neumann service partner.
Warning about magnetic field interference with pacemakers and defibrillators.
Defines the proper and improper usage of the loudspeaker.
Lists the items included in the product package.
Identifies the main components and features of the KH 120.
Instructions on preparing the speakers before placement.
Guidance on acoustically preparing the listening environment.
Detailed advice on optimal speaker placement for accurate reproduction.
Steps for connecting audio sources to the loudspeakers.
Instructions for safely powering the loudspeaker on and off.
How to power the loudspeaker on and off using the switch.
Using acoustical controls to tailor the frequency response to the room.
Setting the output level for desired sound pressure levels.
Method to prevent hum or buzz via XLR pin 1.
Controls for the front panel logo illumination.
Guidelines for cleaning and preserving the loudspeaker.
Solutions for common problems encountered with the loudspeaker.
Illustrates the internal signal flow and components of the KH 120.
Details the pinout for the XLR input connector.
Presents frequency response and group delay measurements.
Diagrams showing recommended speaker placement angles.
General| Brand | Neumann.Berlin |
|---|---|
| Model | KH 120 |
| Category | Speakers |
| Language | English |
To Next Page
