PRIMARY CONTROLS
Gain
The Gain control provides over 60 dB of gain, ranging from clean to heavy
distortion. This control is level-compensated: increasing the gain increases
distortion but only slightly aects the level.
Comp
The single-knob compressor ranges from none to heavy compression. Increasing
this control simultaneously decreases the threshold and increases the ratio and
level parameters of the compressor. As such, the compressor adds additional
clean gain to your signal. A moderate amount of compression can control the
dynamics of your clean tones, while a more modest setting goes a long way in
controlling overdrive and sustain.
Level
The Level control adjusts the output level of the signal.
EQ — Low, Mid, High
The three-band EQ allows you to adjust the low frequencies (bass), middle
frequencies, and high frequencies (treble) of your signal. Unlike the tone stacks
in many amps and pedals, this EQ has been designed so that the controls do not
interact.
To Next Page
Loading...
