Neural DSP Archetype Plini - Neural DSP Cab Simulation

10
NEURAL DSP // ARCHETYPE PLINI
NEURALDSP.COM
ONOFF SWITCH: You can turn On/Off the EQ filter.
EQ BANDS: Bank of 9 sliders controls used to boost or cut
frequency bands.
NEURAL DSP CAB SIMULATION
We have designed a Cabinet simulation for this plugin. It
includes 6 microphones with a range of different positions.
GETTING STARTED
POSITION: Controls where the Microphone is, meaning
from the Center of the Cone, to the Edge of the Cone.
(Disabled when loading external IR file).
DISTANCE: Controls the Distance of the Mic between close
to the Cab and Far towards the Room. (Disabled when
loading external IR file).
MIC LEVEL: Controls the level of the selected impulse.
PAN: Controls the output panning of the selected impulse.
ONOFF SWITCH: Disables or Enables the respective IR
loader Section.
Ø PHASE INVERTER SWITCH: Inverts the phase of the
loaded impulse.
IMPULSE LOADER SELECTOR BOX: Drop down menu for
selecting factory Microphones and loading your own IR
files. The folder path will be saved, then you can navigate
through them by clicking left/right navigation arrows.
DRAG TO POSITION: This feature refers to clicking on the
Microphone, will allow you to position the Microphone
within the Cone area. The values will be reflected on the
Position and Distance knobs and vice versa.